Jazzy Air® MED Specifications
FDA Class II Medical Device*CATEGORY | SPECIFICATION |
---|---|
Model |
Jazzy Air® MED
|
Weight Capacity | 300 lbs. |
Maximum Speed1 | Up to 3.71 mph |
Ground Clearance2 | 0.98" at motor bracket |
Turning Radius2 | 24.41" |
Overall Size2,6 | Length: 41.54" Width: 23.25" |
Drive Wheels | 10", Flat free |
Caster Wheels | 6", Flat free |
Suspension | Active-Trac® with Mid-Wheel 6® Technology |
Range1,4 | Up to 13 miles at 300 lbs. Up to 14.1 miles at 220 lbs. |
Component Weights5 | Complete Assembly (without batteries): 197.2 lbs. Batteries: 22.2 lbs. (10.1 kg) each |
Drivetrain | Two motor, Mid-Wheel 6® drive |
Brakes | “Intelligent Braking” electronic regenerative, disc park brake |
Batteries3 | Two 12-volt, sealed lead-acid, non-spillable deep-cycle U-1 batteries |
Battery Charger | 5 amp, off -board |
Freewheel Operational Force | Less than 60 N |
Drive Control Operational Force | Less than 5 N |
Maximum Rated Slope | 6° |
Maximum Obstacle Climbing Ability (Ascending and Descending) | 1.57" |
Notes: 1 Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller type, tire type, and tire condition. This specifi cation is subject to a variance of +10%, -5%. 2 Due to manufacturing tolerances and continued product improvement, this specifi cation can be subject to a variance of (+ or -) 3%. 3 AGM, Gel-Cell, Lithium-Ion, or Hybrid Gel (Hybrid Gel is defi ned as Nano Silica Gel Electrolyte with High Quality Glass Mat Separators) type required. See III. “Batteries and Charging.” 4 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifi cations and drive system performance. Test conducted at maximum weight capacity. 5 Battery weight may vary based on manufacturer. 6 Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections. |
|
This product conforms to all applicable ANSI/RESNA and ISO 7176 Series standards. All specifi cations subject to change without notice. |