Jazzy® 1450 Specifications
FDA Class II Medical Device*CATEGORY | SPECIFICATION |
---|---|
Model |
Jazzy® 1450
|
Weight Capacity | 600 lbs. |
Turning Radius1 | 26.5" |
Width1 | 29.25" |
Length1,2 | 38.25" |
Maximum Speed3 | Up to 4.9 mph |
Ground Clearance1 | 1.5" at anti-tips |
Front Wheels | 4" solid anti-tips |
Drive Wheels | 14" solid |
Rear Wheels | 9" solid casters |
Drivetrain | Two motor, front-wheel drive |
Braking System | Regenerative and electro-mechanical |
Suspension Type | Swing Arm |
High-Back Seat (max. size) | 32" x 28" |
High-Back Seat-to-Floor Range | 20.5” – 22.5” |
Synergy® Seating | 32”W – 28”D |
Synergy® Seat-to-Floor Range | 17.25” – 19.25” |
Specialty Controls | Yes |
Standard Electronics | 90A, PG VR2 |
Battery Size (2 required) | 12 volt, Group 24 |
Standard Battery Charger | 8A, off-board |
Per-Charge Range3,6 | Up to 16.5 miles |
Battery Weight5 | 52 lbs. each |
Weight of Heaviest Piece4 | 195 lbs. |
Standard Seat Weight | 52 lbs. (high-back) |
Standard Seat Size | 22" x 20" up to 24" x 24" |
Medicare Code Coverage | Group 2: Very Heavy Duty (K0826/K0827) Single Power Very Heavy Duty (K0839) |
Warranty | K0826/K0827 Models: Lifetime limited warranty on frame; 13-month limited on electronics; 13-month on drive motors; 13-month limited on batteries. K0839 Models: Lifetime limited warranty on frame; 2-year warranty on electronics; 18-month limited warranty on drive motors |
Notes: 1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections. 2 Without front riggings. 3 Varies with user weight, terrain, battery type, battery condition and tire pressure. 4 Does not include seat or battery weights. 5 Battery weight may vary based on manufacturer. 6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%. |
|
The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice. |